Fallen trees and large limbs
We cut, section, and remove downed trees and heavy limbs, including pieces that block driveways, rest on fences, or pin other branches in place.
Storm cleanup in Boerne, Texas
Storm Damage Tree Removal
When wind and heavy rain bring trees down, you need hazards cleared fast and handled safely. We remove storm-damaged trees and limbs, protect your property during the work, and leave the area clean and usable again.
✓
Controlled rigging in tight spaces
✓
Property protection planned first
✓
Debris cleanup and haul-off
Safety-first storm cleanup
Book Your Free Inspection
Rapid, safe storm cleanup for Boerne properties
Storm Damage Tree Removal is time-sensitive work. A split trunk can drop without warning, a hung-up limb can fall as the wind shifts, and a tree leaning toward a roof or driveway can turn a bad situation into a bigger one.
Boerne Tree Removal Service focuses on practical, safety-first cleanup after storms in Boerne (78006). We help homeowners and property managers restore access, reduce risk, and handle the heavy work that is not safe to tackle with a ladder and a chainsaw.
If you are comparing providers, start with the basics: Is the crew equipped to rig and lower heavy sections in tight spaces? Will they protect lawns, fences, and nearby structures? Can they remove the whole tree when the root plate has lifted or the trunk is compromised? Those are the details that matter when a storm leaves behind unstable wood.
What our storm-damage removal typically covers
From suspended limbs to compromised trunks, the work is planned around safe movement, protected structures, and a usable property afterward.
Hazard limbs and hangers
We remove broken limbs that are suspended in the canopy or tangled in neighboring trees, using rigging to control the drop zone when space is limited.
Leaning and split trees
If a tree is cracked, uprooted, or has lost structural integrity, we can remove it in sections to reduce the risk of sudden movement during cutting.
Debris hauling and cleanup
Storm cleanup is more than cutting. We chip and haul debris, rake out smaller material, and leave the work area ready for normal use.
Access planning and property protection
Before cutting starts, we plan the safest approach for your site. That includes protecting nearby structures and working around gates, parked vehicles, and tight side yards.
Controlled sectional removal
Book Your Free Inspection
How we handle storm-damaged trees without making the situation worse
Storm-damaged wood behaves differently than a normal takedown. Tension and compression forces can pinch bars, kick limbs, or cause unpredictable splits. We plan each cut sequence to control movement and keep the crew and property out of the danger zone.
What we look for first
- Lean angle, cracks, and root plate lift, often visible as raised soil or a shifting base
- Hung-up limbs and broken tops that can fall while someone is working underneath
- Targets including rooflines, gutters, fences, driveways, and high-traffic areas
How we remove it
We use sectional removal when needed: limb by limb, then trunk pieces, lowered in a controlled way. In tighter residential areas, rigging lets us guide heavy sections down instead of letting them swing or drop. If a full removal is not required, we can also remove only the storm-broken portions when the remaining structure is stable.
If you also need ongoing tree care after the immediate hazards are cleared, our Boerne tree service can help you plan what to prune, what to monitor, and what to remove before the next round of severe weather.
Assessment through cleanup
Our Storm Damage Tree Removal process
A deliberate sequence helps stabilize hazards, protect surrounding property, and restore normal access.
01
Triage and hazard assessment
We start by identifying what can fall or shift now, what is pinned or hung up, and what needs immediate stabilization. If there are multiple issues, we prioritize the highest-risk items first.
02
Access and drop-zone plan
We set work zones and plan where sections will be lowered or placed, factoring in fences, landscaping, driveways, and limited access areas common around homes and small acreage properties.
03
Controlled cutting and removal
We remove damaged limbs and unstable sections using safe cutting techniques and rigging when needed. For compromised trunks, we take the tree down in manageable pieces.
04
Haul-off and final cleanup
We chip and remove debris, cut larger wood for hauling, and clean up the work area so you can get back to normal use of the property.
Property-based pricing
Book Your Free Inspection
How Much Does Storm Damage Tree Removal Cost in Boerne?
Storm damage tree removal in Boerne typically ranges from about $300 to $1,500 for many residential jobs, with complex hazards running $2,000+ when rigging, tight access, or very large trees are involved. A simple fallen-limb cleanup is usually on the low end, while a full damaged-tree removal with haul-off lands higher.
Final pricing depends on tree size, whether limbs are hung up or load-bearing on a roof or fence, access for equipment, and how much debris you want removed. The exact cost is confirmed after an on-site assessment of the damage and safest removal approach.
On-site storm cleanup
Storm cleanup work examples (what to expect on-site)
Homeowner questions
Storm damage tree removal FAQs
How fast can you respond for storm damage tree removal in Boerne? +
Response time depends on the severity of the storm and how many urgent hazards are in the queue, but we prioritize immediate safety risks like blocked driveways, hanging limbs, and trees leaning toward a home. When you reach out, share what is on the ground, what is suspended, and whether any structures are involved so we can triage correctly.
Can you remove a tree that is leaning toward my house after a storm? +
Yes, leaning storm-damaged trees are often removed by taking them down in sections with controlled lowering to keep pieces from striking the structure. The approach depends on the lean, the integrity of the trunk, and the available drop zone, which we confirm during an on-site assessment before cutting.
What should I do before the crew arrives? +
Stay clear of the damaged tree and keep others away, especially if limbs are hung up or the trunk is cracked. If it is safe, move vehicles out of the work area and keep gates unlocked for access. Avoid cutting anything under tension because storm-loaded limbs can move suddenly when a single cut releases pressure.
Will you haul away the debris, or can I keep the wood? +
We can haul off the debris, chip brush, and leave the area clean, or we can stack usable wood if you want to keep it, depending on space and safety. Let us know what you prefer at the start so we plan staging and loading accordingly.
Do you handle trees that have fallen across a fence or are tangled with another tree? +
Yes, those situations are common after storms and usually require controlled cuts to prevent the wood from rolling, swinging, or tearing more of the fence as weight shifts. We assess the bind points and remove sections in a sequence that reduces pressure instead of releasing it all at once.
Can you help if a storm-damaged tree is close to power lines? +
If a tree or limb is contacting or threatening electrical lines, keep everyone away and treat it as an emergency. Utility-related hazards often require coordination and the right clearances; we will advise the safest next step during your request and proceed only when conditions are safe for removal.
Need storm-damaged trees cleared safely?
Tell us what happened, what is on the ground, and what is still hanging or leaning. We will confirm a safe plan for Storm Damage Tree Removal, provide a clear scope, and get your Boerne property cleaned up as quickly as conditions allow.